Windows 10 is out, and here’s why you should upgrade today. We’ve had plenty of customers ask us if it’s worth upgrading or if Windows 10 is better or worse than Windows 7 and 8. Well, here’s five reasons why we believe you should upgrade

1. Performance

Windows 10 is the fastest Windows operating system to date and requires less resources than Windows 7 did. One of the few times a newer version of Windows has performed faster than an earlier version on the same machine, which is one very good reason to upgrade.

 

2. Start-Up Times

With Windows 10, booting starting up your PC has never been so fast! No more popping the kettle on whilst your system starts up. Windows 10 uses a hybrid startup mode to achieve these super fast boot times.

 

3. The Start Menu is back!

The Start menu is finally back (and it’s better than ever)! Microsoft have listened to it’s users and finally re-added the Start menu.

 

4. Xbox integration!

With remote play you can stream your Xbox One to your PC display. Now you can continue even when the TV is in use!

 

5. DirectX 12 has arrived!

The future of gaming on PC – with support for multiple graphics chips (even from different companies!). 4K gaming just got easier.

 

Free Online Backup

If you bring your machine to us to upgrade to Windows 10 before Saturday 5th December, we’ll give you a 1 years subscription to online backup to keep all your documents and photos backed up safely online.

By resetting your Brother printer’s page counter, you can avoid having to reset your cartridge’s flag gear or install one on a starter cartridge. Resetting the page counter is often easier than resetting the cartridge’s gear as it requires no disassembly. HL-3140CW, HL-3150CDN, HL-3150CDW, HL-3170CDW

• Open the front cover of the printer (to access cartridges).
• With the front cover open, simultaneously press the Secure and Cancel buttons.
• The reset menu will now appear on the LCD display.
• Scroll through the menu to select a color and yield to reset.
• The LCD will read “Accepted” once the reset is complete.

DCP-9020CDW, MFC-9130CW, MFC-9140CDN, MFC-9330CDW, MFC-9340CDW

• If an error message appears on the LCD display, press the Cancel (X) button to show the main menu.
• Press the Fax button to make the numeric keypad visible. Then, locate and only locate the Asterisk (Star) button on the numeric keypad. It is important to remember its location as it will not be lit up later when needed.
• Press the Home button to return to the main menu.
• Open the front cover of the printer (to access cartridges).
• With the front cover open, press and hold the unlit Asterisk (Star) button for 5 seconds.
• The reset menu will now appear on the LCD display.
• Scroll through the menu to select a color and yield to reset.
• The LCD will read “Accepted” once the reset is complete.

Follow the steps below to replace the drum unit.

1. Make sure that the printer is turned on and the Drum LED is blinking. Open the front cover.
2. Slowly but firmly pull the drum unit and toner cartridge assembly out of the machine.
3. Push down the green lock lever and take the toner cartridge out of the drum unit.
4. Unpack the new drum unit.

Caution

Wait to unpack a drum unit until immediately before you put it in the printer. Exposure to direct sunlight or room light may damage the drum unit.

1. Put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in properly, the green lock lever will lift automatically.

Caution: Make sure that you put in the toner cartridge properly, or it may separate from the drum unit.

6. Put the drum unit and toner cartridge assembly back in the printer.

1. Reset the drum counter.

If your printer is a not multifunction printer:

1. Press (Power On/Off). Do not close the top cover yet.

1. Press and hold OK for about two seconds to display Drum Unit, and then press OK.
2. Press the Up arrow key to display Reset and reset the drum counter.

                             

          If your printer is a multifunction printer,   Press Clear/Back.

1. Press (Cancel) to interrupt the error.
2. Press (Settings) > All Settings > Machine Info. > Parts Life.
3. Press and hold # until the LCD message changes.
4. Press Drum.
5. Press Yes.
6. Press (Home).

Note:   Only when you replace the drum unit with a new one, you need to reset the drum counter. Do not reset the

drum counter when you only replace the toner cartridge.

8. Close the front cover.

1. Make sure that the Drum LED is now off.

Product Info

How to Replace the drum unit DR2225

Follow the steps below to replace the drum unit.

1. Make sure that the printer is turned on and the Drum LED is blinking. Open the front cover.
2. Slowly but firmly pull the drum unit and toner cartridge assembly out of the machine.
3. Push down the green lock lever and take the toner cartridge out of the drum unit.
4. Unpack the new drum unit.

Caution

Wait to unpack a drum unit until immediately before you put it in the printer. Exposure to direct sunlight or room light may damage the drum unit.

1. Put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in properly, the green lock lever will lift automatically.

Caution: Make sure that you put in the toner cartridge properly, or it may separate from the drum unit.

6. Put the drum unit and toner cartridge assembly back in the printer.

1. Reset the drum counter.

If your printer is a not multifunction printer:

Press and hold down the GO button for about 4 seconds until all the LEDs light up. Once all 4 LEDs are lit, release the button.

                                 

 If your printer is a multifunction printer,   Press Clear to reset the drum counter before closing the front cover.

For models with FAX functions:
To confirm you are installing a new drum unit, press 1.

For models without FAX functions:
To confirm you are installing a new drum unit, press the Up Arrow Key.

Wait for the LCD showing Accepted

Note:   Only when you replace the drum unit with a new one, you need to reset the drum counter. Do not reset the

drum counter when you only replace the toner cartridge.

8. Close the front cover.

1. Make sure that the Drum LED is now off.

More Info

Follow the steps below to replace the drum unit.

1. Make sure that the printer is turned on and the Drum LED is blinking. Open the front cover.
2. Slowly but firmly pull the drum unit and toner cartridge assembly out of the machine.
3. Push down the green lock lever and take the toner cartridge out of the drum unit.
4. Unpack the new drum unit.

Caution

Wait to unpack a drum unit until immediately before you put it in the printer. Exposure to direct sunlight or room light may damage the drum unit.

1. Put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in properly, the green lock lever will lift automatically.

Caution: Make sure that you put in the toner cartridge properly, or it may separate from the drum unit.

6. Put the drum unit and toner cartridge assembly back in the printer.

1. Reset the drum counter.

If your printer is a not multifunction printer:

Press and hold down the white button for about 4 seconds until all the LEDs light up. Once all 4 LEDs are lit, release the button.  If there is a screen on your printer, pls check the menu to see how to reset the drum counter.

                                 

  If your printer is a multifunction printer,   Press Clear/Back.
For MFC users:
To confirm you are installing a new drum, press 1.

For DCP users:
To confirm you are installing a new drum, press the Up Arrow key.

Wait for  the LCD showing Accepted

Note:   Only when you replace the drum unit with a new one, you need to reset the drum counter. Do not reset the

drum counter when you only replace the toner cartridge.

8. Close the front cover.

1. Make sure that the Drum LED is now off.

Product Info

When you replace the toner cartridge or the drum unit, make sure that you clean the inside of the machine. If printed pages are stained with toner, clean the inside of the machine with a dry, lint –free cloth.

When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps:

1. Make sure that the printer is turned on and the Drum LED is blinking. Open the front cover.
2. Slowly but firmly pull the drum unit and toner cartridge assembly out of the machine.
3. Push down the green lock lever and take the toner cartridge out of the drum unit.
4. Unpack the new drum unit.

Caution: Wait to unpack a drum unit until immediately before you put it in the printer. Exposure to direct sunlight or room light may damage the drum unit.

1. Put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in properly, the green lock lever will lift automatically.

Caution: Make sure that you put in the toner cartridge properly, or it may separate from the drum unit.

1. Put the drum unit and toner cartridge assembly back in the printer.
2. Reset the drum counter. Press and hold down the GO button for about 4 seconds until all the LEDs light up. Once all 4 LEDs are lit, release the button. If there is a screen on your printer, pls check the menu to see how to reset the drum counter.

Note: Only when you replace the drum unit with a new one, you need to reset the drum counter. Do not reset the drum counter when you only replace the toner cartridge.

1. Close the front cover.
2. Make sure that the Drum LED is now off

Product inof

Follow the procedure below to replace drum unit.

1. Open the front cover and take out the drum unit and toner cartridge assembly.

2. Hold down the lock lever on the right and take the toner cartridge out of the drum unit.
3. Unpack the new drum unit.
4. Put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically.
5. Put the drum unit and toner cartridge assembly back in the machine.
   Do not close the front cover.
6. Reset the drum counter.

There are different ways to reset the drum counter, depending on the printer model. Please check the printer menu.

• Press and hold down the Go button for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release the Go button

Or

• Press Clear/Back.
  To confirm you are installing a new drum, press 1. Wait to see the LCD shows “Accepted”

7. Close the front cover.

The New Apple Macbook air and Macbook pro Retina are here, Ipad aire as well!!!

http://www.topink.co.nz/products/list/macbook_ipad-333-page0.html

Check out our great range of apple products!!